About 9 results for adhesive anchor

adhesive anchor

Results per page: 20
  • adhesive anchor

    adhesive anchor

    Uses: Threaded rod anchoringRebar dowellingBonding hardened concrete to hardened concretePick proof sealant around doors, windows and fixturesPaste-over for crack injection. Technical data:&...

  • injection adhesive anchor

    injection adhesive anchor

    injection adhesive anchor The epoxy bonding anchor is consising of epoxy resin and hardener.It is a high-strength injection cartridge.   Uses: -Threaded rod anchring -Rebar dowelling. -Bond...

  • Adhesive anchor

    Adhesive anchor

    Bolt Size Anchor Length (mm) Drill Dia. (mm) M6 45 12 M8 55 14 M10 60 16 M12 75 20 M16 115 25 M20 130 32 Our factory was founded in 1992 with registered capital of RMB25...

  • HM-360 Injection-type Vinyl Anchor Adhesive for Chemical Anchor Rebar

    HM-360 Injection-type Vinyl Anchor Adhesive for Chemical Anchor Rebar

    HM-360 Injection-type Vinyl Anchor Adhesive for Chemical Anchor Rebar is a two-component, 5:1 ratio, mixed- type resin adhesive for use as a high strength, non-shrink anchor grouting material. ...

  • Epoxy resin Chemical Anchor Adhesive

    Epoxy resin Chemical Anchor Adhesive

    Double Component Noraml temprature Anchor Adhesive, Features: Double component, Fast solidity; Used for concrete, Stones, Metals etc; Temprature ranged -5 - 45 C.degree; High strength and reinfor...

  • HM-500 Injection-type Epoxy Resin Adhesive for Rebar Chemical Anchor

    HM-500 Injection-type Epoxy Resin Adhesive for Rebar Chemical Anchor

    HM-500 Injection-type Epoxy Resin Adhesive for Rebar Chemical Anchor is a two-component, 3:1 ratio, high solids, modified epoxy resin adhesive for use as a high strength, non-shrink anchor grouting ma...

  • YC500 injectable chemical anchor adhesive

    YC500 injectable chemical anchor adhesive

    YC500 Injectabled epoxy chemical anchor Adhesive  is a two component modified epoxy adhesive,  A, B components have been pla...

  • HM-360 Injection-type Vinyl Anchor Adhesive

    HM-360 Injection-type Vinyl Anchor Adhesive

    HM-360 Injection-type Vinyl Anchor Adhesive is a two-component, 5:1 ratio, mixed- type resin adhesive for use as a high strength, non-shrink anchor grouting material. 1. Uses a) Secure rebar ...

  • Construction injection anchor adhesive

    Construction injection anchor adhesive

    SHZ Construction injection anchor(hard tube) is a kind of doubled-share high polymer polyester dust plasm.It has the advantage of convenient and fast construction and clean.   Threaded rod ...

SPONSOR AD
ads728*90